8 - 6
Mounting and commissioning the machine
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 8 - 08
● If required, correct the position of the sewing jig with the number keys
(according to the
function shown in the display).
● Confirm by pressing Enter and remove adjustment pin 1
from the holes.
Enter
Fig. 8 - 09
Needle position
● Select the NEEDLE POSITION function from the menu for adjusting the zero point.
● Press the plus key to position the sewing jig transport in needle position.
2
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
1 - GAUGE POSITION
2 - NEEDLE POSITION
3 - FOLDER POSITION
● Secure adjustment pin 1 in the needle bar using screw 2.
● Check by turning handwheel 3 whether the adjustment pin 1 can be guided into the
adjustment hole of the sewing jig.
ENTER GAUGE POSITION
CONFIRM WITH ENTER KEY
SM : -11 JIG SM2 : 0
Fig. 8 - 10
1
2
3
To Next Page
Loading...
