8 - 7
Mounting and commissioning the machine
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 8 - 11
● If required, correct the position of the sewing jig with the number keys
(according to the
function shown in the display).
● Confirm by pressing Enter, loosen screw 2 and remove adjustment pin 1.
Enter
Fig. 8 - 12
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
1 - GAUGE POSITION
2 - NEEDLE POSITION
3 - FOLDER POSITION
Folder position
● Select the FOLDER POSITION function from the menu for adjusting the zero point.
● Press the plus key to position the sewing jig transport in folder position.
3
● Check whether adjustment pin 1 can be guided into the adjustment hole of the sewing
jig and the pocket plate.
ENTER NEEDLE POSITION
CONFIRM WITH ENTER KEY
X : 2 Y : 4
Fig. 8 - 13
1
To Next Page
Loading...
