Input mode functions
11 - 10
4
5
TIME FOR STACK TRESTLE BACK
For entering the delay time between the slow rolling movement of the stacker roller
and the stack trestle back.
TIME FOR EDGE FOLDERS BACK
For entering the delay time for the edge folder. The time should be set in such a way
that the edge folder only starts moving upwards after the folder plates have positioned
in their furthest end position.
TIME FOR POCKET PLATE UP
For entering the delay time between pocket plate back and pocket plate up.
FEED SPEED
For entering the speed of the sewing jig feed from the folding station to the sewing
station.
SEAM CORRECTION X
Changes the position of the seam on the pocket in the horizontal direction.
SEAM CORRECTION Y
Changes the position of the seam on the pocket in the vertical direction.
6
8
7
9
To Next Page
Loading...
