Input mode functions
11 - 16
LABEL FEED
If the machine is equipped with the optional label feed mechanism, this
function serves to switch this option on or off.
JIG VERSION
For selecting one of various jig modes.
● Standard
Standard jig, that is, no flaps, no variable sewing slot.
● Flap version 1
The flap part is moved into position on the sewing jig.
● Flap version 2
The flap part is turned over into position on the sewing jig.
● Variable sewing slot
The sewing jig is equipped with a variable sewing slot.
CONTINUOUS CARRIAGE MOVEMENT
Lets you choose the type of carriage movement (continuous or intermittent).
LOCK / RELEASE FUNCTIONS
Releases/locks all functions in the INPUT mode, secures them with a code
number or makes them accessible to authorized personnel only by means of a
key.
For the table of code numbers of the individual functions please refer
to chapter 14.03.01 Tables for lock/release functions).
TIMES
This function opens a menu for changing times
4
5
5
4
5
TIME FOR LABEL CLAMP CLOSED
With this function, the reaction time for label clamp closed can be changed.
Fig. 11 - 27a
1
1 - TIME FOR LABEL CLAMP CLOSED 0.2.s
● Version 3
The cut part is held on the table by suction air. After the start button is
pressed a frame is lowered for loading the pre-folded pocket. When the
start button is pressed again, both parts are transferred to the sewing
station.
● Version 4
Same as “standard” version, but for folding rounded pockets.
To Next Page
Loading...
