11 - 15
Input mode functions
NEEDLE THREAD MONITOR
Switches the needle thread monitor on or off.
BOBBIN THREAD MONITOR
Switches the bobbin thread monitor on or off.
BOBBIN THREAD SENSOR
Switches the bobbin thread sensor on or off.
LANGUAGE SELECTION
Opens a menu where you can select different languages in the display (see
chapter 9.05 Selecting a language).
1
2
3
2
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 26
LANGUAGE SELECTION:
1 - GERMAN 6 - POLISH
2 - ENGLISH
3 - FRENCH
4 - SPANISH
5 - ITALIAN
OPTIONS
Opens a menu where you can switch optional work aids on or off:
3
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 27
1 - TILT HEAD: -
2 - JIG MONITOR: ON
3 - FOLDER VERSION: STANDARD
4 - LABEL FEED: -
5 - JIG VERSION: STANDARD
TILT HEAD
(for changing the bobbin for sewing heads with a horizontal hook)
If the machine is equipped with a tiltable head, this function serves to switch
the extra on or off.
JIG MONITOR
If the machine is equipped with the optional jig monitoring device, this
function serves to switch the optional feature on or off.
FOLDER VERSION
Lets you choose between 5 folding operations.
● Standard
The parts cutting is kept on the table by means of a vacuum blower while
the pocket cutting is slid over the pocket plate. After the start keys have
been pressed, the pocket cutting is folded and, together with the parts
cutting, is transported to the sewing station.
● Version 1
The parts cutting is kept on the table by means of a vacuum blower. After
the start keys have been pressed the workpiece is transported to the
sewing station.
● Version 2
The parts cutting is kept on the table by means of a vacuum blower while
the pocket cutting is slid over the pocket plate. After the start keys have
been pressed, both cuttings are transported to the sewing station
(without folding).
1
2
3
To Next Page
Loading...
