User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
• DHCP Rate Limit
Enable or disable the port error disabled function to check status by DHCP rate
limit
• ARP Rate Limt
Enable or disable the port error disabled function to check status by ARP rate limit
Button
: Click to apply changes.
Figure 4-3-14: Error Disabled Information Page Screenshot
The page includes the following fields:
Object Description
• Recovery Interval
Display the current recovery interval time.
• BPDU Guard
Display the current BPDU guard status.
• Self Loop
Display the current self loop status.
• Broadcast Flood
Display the current broadcst flood status.
• Unknown Multicast Flood
Display the current unknown multicast flood status.
• Unicast Flood
Display the current unicast flood status.
• ACL
Display the current ACL status.
• Port Security Violation
Display the current port security violation status.
• DHCP Rate Limit
Display the current DHCP rate limit status.
• ARP Rate Limt
Display the current ARP rate limit status.