Planet GS-4210-16T2S - Dot1 X Command; Do Command; Enable Command; End Command

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
414
6.3.7 dot1x Command
Description:
802.1x configuration
Syntax:
dot1x guest-vlan<1-4094> VLAN ID (e.g. 100)
6.3.8 do Command
Description:
To run exec commands in current mode
Syntax:
do SEQUENCE (Exec Command)
6.3.9 enable Command
Description:
Local Enable Password
Syntax:
enable password/privilege/secret
6.3.10 end Command
Description:
End current mode and change to enable mode
Syntax:
end
6.3.11 errdisable Command
Description:
Error Disable
Syntax:
errdisable recovery cause/interval