Planet GS-4210-16T2S - Rate Limit

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
277
4.9.4.5 Rate Limit
The ARP Rate Limit Setting and Config screens in Figure 4-9-36 and Figure 4-9-37 appear.
Figure 4-9-36: ARP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object Description
• Port
Select port for this drop down list
• State
Set default or user-define
• Rate Limit (pps)
Configure the rate limit for the port policer. The default value is "unlimited".
Button
: Click to apply changes.
Figure 4-9-37: ARP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object Description
• Port
The switch port number of the logical port.
• Rate Limit (pps)
Display the current rate limit.