Planet GS-4210-16T2S - Qos Command; Radius Command; Rate-Limit Command; Rmon Command

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
420
6.3.31 qos Command
Description:
Enable/Disable QoS on the device and enter the QoS mode (advance/basic)
Syntax:
qos
advanced E nable/Disable QoS on the device and enter the QoS mode (advance/basic).
advanced-mode Set the trust mode when the default action is ports-trusted in advanced mode.
aggregate-policer Configure a policer that can be applied to multiple classes within the same policy map. Use the no form of
the command to remove policer.
basic Set system QoS advance mode.
map C onfigure the QoS maps.
queue Q ueue configuration
trust Configure the global trust mode . Use the no form to return untrusted state.
6.3.32 radius Command
Description:
RADIUS server information
Syntax:
radius default-config/host
6.3.33 rate-limit Command
Description:
Rate limit configuration of the specified incoming traffic
Syntax:
rate-limit egress/ingress
6.3.34 rmon Command
Description:
RMON information
Syntax:
rmon alarm/event/history