Planet GS-4210-16T2S - Storm-Control Command; System Command; Tacacs Command; Udld Command

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
422
6.3.38 storm-control Command
Description:
Storm control configuration
Syntax:
Storm-control
ifg I nterframe configuration
unit U nit configuration
6.3.39 system Command
Description:
System information
Syntax:
contact Set host contact
location S et host location
name S et host name
6.3.40 tacacs Command
Description:
TACACS+ server information
Syntax:
tacacs
default-config TACACS+ server default parameters
host T ACACS+ server host
6.3.41 udld Command
Description:
Configure global UDLD setting
Syntax:
udld
aggressive Enable UDLD protocol in aggressive mode on fiber ports except wher e locally configured
enable Enable UDLD protocol on fiber ports except where locally configured
message Set UDLD message parameters