Planet GS-4210-16T2S - Logging Message

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
69
4.2.6.4 Logging Message
The switch log view is provided here. The Log View screens in Figure 4-2-18, Figure 4-2-19 and Figure 4-2-20 appear.
Figure 4-2-18: Log Information Select Page Screenshot
The page includes the following fields:
Object Description
• Target
The target of the log view entry. The following target types are supported:
 Buffered: Target the buffered of the log view.
 Flash: Target the Flash of the log view.
• Severity
The severity of the log view entry. The following severity types are supported:
 Emerg: Emergency level of the system unsable for log view.
 Alert: Alert level of the immediate action needed for log view.
 Crit: Critical level of the critical conditions for log view.
 Error: Error level of the error conditions for log view.
 Warning: Warning level of the warning conditions for log view.
 Notice: Notice level of the normal but significant conditions for log view.
 Info: Informational level of the informational messages for log view.
 Debug: Debug level of the debugging messages for log view.
• Category
The category of the log view that includes:
AAA, ACL, CABLE_DIAG, CDP, DAI, DHCP_SNOOPING, Dot1X, GVRP,
IGMP_SNOOPING, IPSG, L2, LLDP, Mirror, MLD_SNOOPING, Platform,
PM, Port, PORT_SECURITY, QoS, Rate, SNMP, S T P, R M A ,
Security-suite,Ststem, Trunk