Planet GS-4210 SERIES User Manual

User’s Manual of GS-4210 Series
Figure 4-4-13 LACP Information Page Screenshot
The page includes the following fields:
Object Description
 Trunk
Display the current trunk ID
 Port
Display the current port number
 PartnerSysId
The system ID of link partner. This field would be updated when the port receives
LACP PDU from link partner
 PnKey
Port key of partner. This field would be updated when the port receives LACP
PDU from link partner
 AtKey
Port key of actor. The key is designed to be the same as trunk ID.
 Sel
LACP selection logic status of the port
 “S” means selected
 “U” means unselected
 “D” means standby
 Mux
LACP mux state machine status of the port
 “DETACH” means the port is in detached state
 “WAIT” means waiting state
 “ATTACH” means attach state
 “CLLCT” means collecting state
 “DSTRBT” means distributing state
 Receiv
LACP receive state machine status of the port
 “INIT” means the port is in initialize state
 “PORTds” means port disabled state
 “EXPR” means expired state
 “LACPds” means LACP disabled state
 “DFLT” means defaulted state
 “CRRNT” means current state
 PrdTx
LACP periodic transmission state machine status of the port
 “no PRD” means the port is in no periodic state
 “FstPRD” means fast periodic state
 “SlwPRD” means slow periodic state
 “PrdTX” means periodic TX state
 AtState
The actor state field of LACP PDU description.
The field from left to right describes: “LACP_Activity”, “LACP_Timeout”,
113

Planet GS-4210 SERIES Specifications

General

Power Input	100-240VAC, 50/60Hz
Enclosure	Metal
Product Type	Managed Switch
Ports	24 x 10/100/1000BASE-T, 4 x 100/1000BASE-X SFP
MAC Address Table	8K
Jumbo Frame	9K Bytes
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Installation	Rack-mountable
Dimensions	440 x 180 x 44 mm (W x D x H)
Weight	GS-4210-24UP4S: 2500g