Name: Planet GS-4210 SERIES
Brand: Planet
Rating: 5 (1 reviews)

To Next Page

To Previous Page

User’s Manual of GS-4210 Series

The page includes the following fields:

Object Description

 Save Configuration to

FLASH

Click to save the configuration. For more detailed information, please refer to

chapter 4.1.2

 Restore to Default

Click to reset switch in default parameter. For more detailed information, please

refer to chapter 4.15.1

4.1.2 Configuration Manager

The system file folder contains configuration settings. The screen in Figure 4-1-7 appears.

Figure 4-1-7 Save Button Screenshot

The page includes the following fields:

Object Description

 Running Configuration

Refers to the running configuration sequence use in the switch.

In switch, the running configuration file stores in the RAM. In the current version,

the running configuration sequence running-config can be saved from the RAM

to FLASH by saving “Source File = Running Configuration” to “Destination

File = Startup Configuration”, so that the running configuration sequence

becomes the startup configuration file, which is called configuration save.

To prevent illicit file upload and easier configuration, switch mandates the name

of running configuration file to be running-config.

 Startup Configuration

Refers to the configuration sequence used in switch startup.

Startup configuration file stores in nonvolatile storage, corresponding to the

so-called configuration save. If the device supports multi-config file, name the

configuration file to be .cfg file, the default is startup.cfg.

If the device does not support multi-config file, mandates the name of startup

Other manuals for Planet GS-4210 SERIES

Questions and Answers:

Need help?

Do you have a question about the Planet GS-4210 SERIES and is the answer not in the manual?

General