Planet GS-4210 SERIES - Rate Limit

User’s Manual of GS-4210 Series
4.9.8.5 Rate Limit
The ARP Rate Limit Setting and Config screens in Figure 4-9-57 & Figure 4-9-58 appear.
Figure 4-9-57 ARP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object Description
 Port
Select port for this drop down list
 State
Set default or user-define
 Rate Limit (pps)
Configure the rate limit for the port policer. The default value is "unlimited".
Buttons
: Click to apply changes.
Figure 4-9-58 ARP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object Description
 Port
The switch port number of the logical port
 Rate Limit (pps)
Display the current rate limit
259