Planet GS-4210 SERIES - Page 24

User’s Manual of GS-4210 Series
GS-4210-48T4S
Product GS-4210-48T4S
Hardware Specifications
Copper Ports 48 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
4 100/1000BASE-X SFP interfaces,
Supports 100/1000Mbps dual mode and DDM
Switch Architecture Store-and-Forward
Switch Fabric 104Gbps / non-blocking
Switch Throughput@64Bytes 77.38Mpps @64Bytes
Address Table 16K entries
Share Data Buffer 12Mbit SRAM Packet Buffer
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
System:
PWR(Power) (Green)
SYS(System) (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 48):
1000Mbps (Orange), LNK/ACT (Green)
10/100Mbps (None), LNK/ACT (Green)
100/1000Mbps SFP Interfaces (Port 49 to Port 52):
1000Mbps, LNK/ACT (Green)
100Mbps, LNK/ACT (Orange)
Thermal Fan Fanless design (no fan)
Power Requirements AC 100~240V, 50/60Hz, auto-sensing.
ESD Protection 6KV DC
Power Consumption /
Dissipation
34 watts / 116 BTU
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
Weight 3.7 kg
Enclosure Metal
Layer 2 Functions
Port Mirroring
TX / RX / Both
Many-to-1 monitor
VLAN
802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
24