Planmeca Compact i3 User Manual

Help messages
HELP
CODE
MEANING ACTION OR EXPLANATION
H 98 User not found. User not found with this PlanID tag. Create
a new user or select an existing Romexis
user and assign the PlanID tag.
H 98.1 User login failed. Retry login or reboot the unit. If problem
persists, contact service.
H 98.2 RFID unknown. The RFID is unknown to the system.
H 99 Unit has been switched off without
performing long flushing after water has
been used. Perform long flushing.
HE200 Detected new software update. Confirm to
install?
HE201 Detected new software update SD-card.
Confirm to install 5.3.0.9.R ?
HE210 Software update. Installing to Control panel
bootloader sw. DO NOT TURN POWER
OFF.
Do not turn the power off while the software
is being updated.
HE212 Software update. Installing to Control panel
application sw. DO NOT TURN POWER
OFF.
Do not turn the power off while the software
is being updated.
HE214 Software update. Installing to Control panel
application sw. DO NOT TURN POWER
OFF.
Do not turn the power off while the software
is being updated.
HE216 Software update. Downloading from server.
DO NOT TURN POWER OFF.
Do not turn the power off while downloading
software from the server.
HE218 Software update. Installing to Main PCB.
DO NOT TURN POWER OFF.
Do not turn the power off while the software
is being updated.
END Flushing completed. Remove syringe from
flushing holder and return it to console. If
syringe is removed, return it to flushing
holder.
DOOR Cuspidor door is open. Close the door.
FC.LD Move foot control pedal to leftmost position.
Press pedal down and hold. While holding,
push centre knob briefly in 'chair up'
direction.
Move the foot control pedal to the leftmost
position. Press the pedal down and hold.
While holding, push the centre knob briefly
in the ‘chair up’ direction.
FC.LU Move foot control pedal to leftmost position
and hold. While holding, push centre knob
briefly in 'chair up' direction.
Move the foot control pedal to the leftmost
position and hold. While holding, push the
centre knob briefly in the ‘chair up’ direction.
FC.CD Press foot control pedal down and hold.
While holding, push centre knob briefly in
'chair up' direction.
Press the foot control pedal down and hold.
While holding, push the centre knob briefly
in the ‘chair up’ direction.
FC.CU Keep foot control pedal in rest position
(centre). Push centre knob briefly in 'chair
up' direction.
Keep the foot control pedal in the rest
position (centre). Push the centre knob
briefly in the ‘chair up’ direction.
29 Help and error messages
210 Planmeca Compact i3 User's manual

Planmeca Compact i3 Specifications

General

Brand	Planmeca
Model	Compact i3
Category	Dental equipment
Language	English