3
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
3.45
9. The table below lists the big end bore diameter
specifications.
BEARING SELECTION CHART — ROD
BEARINGS
CONNECTING ROD BIG END BORE
DIAMETERS
1 2
3
1.7318 -
1.7321"
(43.989 -
43.996 mm)
1.7321 -
1.7323"
(43.996 -
44.003 mm)
1.7323 -
1.7326"
(44.003 -
44.010 mm)
10. Whether using new connecting rods or re-installing
the original ones, refer to the bearing selection chart
provided in the Connecting Rod Bearing Selection
page 3.47 procedure.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
