Polaris General 2020 User Manual

11
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
11.53
2. Remove the remaining fasteners holding the upper
front fascia to the vehicle and the hood liner.
Disconnect the headlights from the electrical harness
and remove the front fascia from the vehicle.
HOOD LINER REMOVAL
1. To remove the hood liner, remove the fasteners and
clamps securing the pulse bar mounting bracket,
intake vent, and coolant expansion bottle.
2. Remove the fasteners holding the hood liner to the
vehicle and remove the hood liner.
EXTERIOR BODY COMPONENT
REMOVAL - GENERAL 4
1. Remove the hood from the vehicle. Refer to “Hood
Removal” page 11.51 procedure.
2. Remove the front bumper from the vehicle. Refer to
“Front Bumper Removal” page 13.19 procedure.
FRONT FENDER FLAIR REMOVAL
1. Remove the fastener holding the front fender flair to
the front fender. Pull the front fender flair from the
tabs holding it to the vehicle.
FRONT FENDER REMOVAL
1. Remove the fasteners holding the front fender to the
vehicle. Pull the front fender off the vehicle.
NOTICE
Remove the front grill mesh to access the fasteners on
the front of the fender.
BODY / FRAME

Polaris General 2020 Specifications

General

Brand	Polaris
Model	General 2020
Category	Offroad Vehicle
Language	English