11
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
11.81
5. With one person pushing the door inward and
upward, have a second person tighten the door hinge
fasteners
w
.
TORQUE
Door Hinge Fasteners:
17 lb-ft (23 Nm)
6. Check the door gap on its leading edge.
NOTICE
If door gap adjustment is needed, make a small
adjustment to the striker pin vertical position and redo
steps 1–4.
7. Verify that the door properly opens, closes, and locks.
DOOR CABLE ADJUSTMENT
To watch a video on this procedure, Scan the provided
QR code or click here.
FRONT DOOR CABLE ADJUSTMENT
1. Remove inner door trim by removing its fastener
q
.
2. Remove door hinge fastener covers
w
.
BODY / FRAME