3
3.51
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
32. Remove snap ring from the assembly. Place housing
in a support and press out the bearing/shaft
assembly.
33. Place the shaft in a press to remove the bearing.
34. Press shaft into the new bearing.
35. Press the bearing/shaft assembly using the bearing's
outer race. Do not use the shaft to press the
assembly into the housing, as bearing damage may
result. Install retaining ring.
36. Press gear onto shaft while supporting the housing.
ENGINE
To Next Page
Loading...
