quadient IN-600 - Managing Operators

Managing Operators5.5
In Account with Access control Mode and as supervisor, you can create up to 50 Operators
that each correspond to a PIN code (see Overview on page 95).
This section only applies to the Account with Access Control Mode
(see Overview on page 95).
If you use MAS, you can only manage the operator PINs from the
PC.
Operator Options
The following options must be specified when creating operators.
DescriptionFormatOption
Operator PIN code.Two Operators cannot
have the same PIN code.
4 digitPIN code
Operator name.Two Operators cannot have
the same name.
20 alphanumeric
characters
Name
Users can only log in using active Operator's
PIN codes.
Active/InactiveStatus
Accounts that the Operator may use.List of accounts
Only active accounts are displayed on the User screens.
113
| Page 113 | | Jan-13-2017 10:45 |
5
Managing Accounts and Assigning Rights