How to Display Hardware Data
To display hardware data:
1. As supervisor (see How to Log in as Supervisor on page 154):
Press and select the path: Maintenance System info Hardware
information
2. The system hardware data appears on the screen.
How to Display the Event Lists
To display the event lists:
1. As supervisor (see How to Log in as Supervisor on page 154):
Press and select the path: Maintenance System info Event list
2. Select the Base events list or the Postage Meter events list or Server connection
history
3. Press [OK] to validate.
4. The system displays the selected list in a table which includes:
The Code of the event.
The Date and time of the event.
The Cycles when the event occurred.
5. Note the Code and refer to your customer service or your authorized Neopost Dealer.
232
| Page 232 | Jan-13-2017 10:45 |
11
Troubleshooting
To Next Page
Loading...
