Updating Registration
Check that your Mailing System is connected to the network before starting.
How to Run the Registration Update
To run the registration update:
1. As supervisor (see How to Log in as Supervisor on page 154):
Press and select the path: Maintenance Processes
A confirmation message is displayed.
2. Press [OK].
3. Select Update registration.
4. Press Continue twice to start the Update Registration Process.
A message "Transaction completed" is displayed.
5. Press [OK] twice.
6. Enter the Geocode. Please refer to the User guide for the code values.
7. Press [OK].
The registration update process is finished.
8. Press Finish to return to the supervisor main menu.
9. Check printed postal code to confirm change.
10
Maintaining your Mailing System
219
| Page 219 | Jan-13-2017 10:45 |
To Next Page
Loading...
