LAN Settings
LAN settings can only be completed if your system is connected
to the LAN at power-up.
How to Set your LAN Preferences
To set the the LAN preferences:
1. As supervisor (see How to Log in as Supervisor on page 154):
Press and select the path: Communication settings LAN settings
The LAN configuration menu is displayed.
2. Select:
- DHCP ON
- DNS AUTO ON
- HALF DUPLEX
and press [OK] four times for a standard LAN configuration.
182
| Page 182 | Jan-13-2017 10:45 |
8
Configuring your Mailing System
To Next Page
Loading...
