How to Clear Mail Jammed in the Auto-Feeder
To clear mail jammed in the Auto-Feeder:
1. Open feeder cover.
2. On model without sealer, hold the two blue levers to raise the mail path guides and
rollers.
On a feeder with sealer, push down on the blue handle then lift up the drive assembly.
3. If necessary, pull up the brush release lever and remove the brush assembly.
4. Remove jammed envelopes.
5. If applicable, reinstall the brush assembly and push the release lever until it snaps
into place.
11
Troubleshooting
225
| Page 225 | Jan-13-2017 10:45 |
To Next Page
Loading...
