Printing Offset
The printing offset is the distance between the right edge of the envelope and the location
where the impression will be printed. Moving your Meter Impression may be needed when
printing on thick envelopes with rounded edges.
You can increase the distance by about 5 mm / 13/64" or 10 mm / 25/64".
How to Set the Default Printing Offset
To change the default printing offset:
1. As supervisor (see How to Log in as Supervisor on page 154):
Press and select the path: Default User Settings System Settings
Print Offset
2. Set the default print offset from a position list.
3. Press [OK] to validate.
8
Configuring your Mailing System
177
| Page 177 | Jan-13-2017 10:45 |
To Next Page
Loading...
