Setting an Impression Memory for [Permit] Mail
To set the meter impression quickly, consider using Impression
memories.The Impression memories store meter impression
characteristics together with rates and, if active, charged account.
See Using Impression Memories on page 79.
Processing [Permit] Mail
To run mail, follow the procedure below after you have completed the sequence in How to
Set Postage for [Permit] Mail on page 46.
If you need to change the Account to allocate the postage costs to,
(on Account-enabled configurations), see How to Change Account
on page 68
How to Process [Permit] Mail
In mode Standard weighing
From the home screen:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2.
Press .The system motors start running.
48
| Page 48 | Jan-13-2017 10:45 |
3
Processing Mail
To Next Page
Loading...
