Using the Feeder
The instructions below provide details on how to place a stack of mail in the Feeder.
Depending on the Weighing Method you choose to run your mail, you may have to insert
your envelopes one by one or place a stack of envelopes in the Feeder.
Each stack may contain a mix of envelopes of different thicknesses and sizes.
How to Use the Feeder
Feeding a stack of mail pieces:
1. Fan the envelopes to separate them.
2. Bevel the edge of the stack.
3. Place the envelopes in the feeder, their upper edge resting against the rear guide.
3
Processing Mail
35
| Page 35 | Jan-13-2017 10:45 |
To Next Page
Loading...
