Changing the Weighing Mode
At start-up, the default weighing mode is active.
See also
• To change the default weighing mode as supervisor, see How to Change the Weighing
Mode on page 74.
• To change the weighing mode according to the type of process you want to run (see
Choosing a Weighing Mode on page 72), follow the steps outlined below.
How to Change the Weighing Mode
To change the weighing mode from the home screen:
1. Either:
Press and select the path: System Settings
Weighing Modes
Press or
The Weighing mode screen is displayed.
The options actually displayed in the screen depend on the weighing
devices that are connected to your Mailing System and on features
that are activated.
2. Select the weighing mode.
If you select the option Differential Weighing Automatic tape, make
sure the Auto-Label Dispenser is properly filled with labels. See
How to Fill the Automatic Label Dispenser on page 83.
74
| Page 74 | Jan-13-2017 10:45 |
3
Processing Mail
To Next Page
Loading...
