Adjusting the Sealing Fluid Flow
Before you adjust the sealing fluid flow, make sure that the brushes and sponge are clean
(see How to Clean the Brushes and Sponge (Sealer) on page 213).
How to Adjust the Sealing Fluid Flow
To adjust the sealing fluid flow:
1. To adjust the sealing fluid flow:
When standing in front of the feeder:
- Push the lever towards the left-hand side to increase the fuild level.
- Push the lever towards the right-hand side to decrease the fluid level.
212
| Page 212 | Jan-13-2017 10:45 |
10
Maintaining your Mailing System
To Next Page
Loading...
