quadient IN-600 - Cleaning the Mail Path; How to Clean the Brushes and Sponge (Sealer)

Cleaning the Mail Path10.3
Cleaning the mail path includes:
• Cleaning sealer brushes and sponge.
• Cleaning feeder belts and rollers.
• Cleaning the Mailing System sensors on the mail path.
Cleaning Brushes and Sponge of the Sealer
MAKE SURE YOUR SYSTEM IS DISCONNECTED FROM POWER
SOURCE BEFORE CLEANING!
How to Clean the Brushes and Sponge (Sealer)
To clean the brushes and sponge of the feeder:
1. Open the feeder and push the left of the upper blue release lever to raise the upper
drive assembly.
2. Pull up the brush release lever.
213
| Page 213 | | Jan-13-2017 10:45 |
10
Maintaining your Mailing System