Filling and Adjusting the Feed-
er Sealer
10.2
Filling the Sealer Bottle
The Automatic Feeder uses water for sealing envelopes. For optimum sealing results, using
Sure Seal is recommended, but is not mandatory.
If the system runs out of sealing fluid during a job run, the system will continue to process
your items but your envelopes will not be sealed properly.
How to Fill the Sealer Bottle
To add water (or sealing solution) to the bottle:
1. Remove the bottle from its base and turn it over.
2. Unscrew the cap and fill the bottle with fluid.
3. Screw the cap back and put the bottle back into place.
211
| Page 211 | | Jan-13-2017 10:45 |
10
Maintaining your Mailing System
To Next Page
Loading...
