quadient IN-600 - How to Exit the Supervisor Mode

You can log in as supervisor by directly typing the supervisor PIN
code, in place of a regular user PIN code, on Mailing Systems that
ask for a PIN code at start-up.
Exiting the Supervisor Mode
Follow the step below to exit the supervisor mode.You must exit the supervisor Mode
before you can begin to print postage.
How to Exit the Supervisor Mode
To exit the supervisor mode:
1. As supervisor:
Press .
The system will go into 'Sleep' mode and supervisor is logged out.
8
Configuring your Mailing System
155
| Page 155 | Jan-13-2017 10:45 |