Frequently Asked Questions
System check list:
AnswerQuestion...
Look at the funds counter at the bottom of the screen,
or:
Press and enter 1 to check your funds balance.
To add funds, see How to Add Postage Funds on
page 90.
You can set up your system to alert you when your
available Postage Funds fall below a preset value
(see How to Set the Low-Funds Threshold on page
165).
Do I have enough postage?
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see Batch Re-
port on page 126).
Select Reset counter on the home screen, or
See How to Reset Batch Counters on page 82.
Do I need to clear the Batch
Counter?
For sealing envelopes.
For sealer-equipped feeders, see How to Fill the
Sealer Bottle on page 211.
Is the Sealing Fluid Container
properly filled?
Before placing envelope(s) on the Weighing Platform,
your Home Screen should display 0 g. If __g is dis-
played, press and hold the key to zero the
WP.
See How to Rezero the Weighing Platform on page
169.
Is the Weighing Platform prop-
erly zeroed or tared?
See How to Fill the Automatic Label Dispenser on
page 83.
Is the Automatic Label Dispenser
Filled??
(if you plan to print on labels)
To display the level of ink in the printing headset, see
How to Display Ink Level and Cartridge Data on page
202.
Is there enough ink in the cart-
ridge?
34
| Page 34 | Jan-13-2017 10:45 |
3
Processing Mail
To Next Page
Loading...
