3. Withdraw the envelope from the WP and insert it into the mail path against the
rear-guide wall, side to be printed facing upwards.
If mail piece is bigger than mail path maximum thickness (see Mail
Specifications on page 237), press before you press
to print a label. The label is printed at once.
4. The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
Otherwise, if you want to print several identical labels:
1.
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see Filling the Label
Dispenser on page 83).
2.
Press to print the labels.
In other modes (Manual weight entry , No weight)
From the home screen:
1.
Press . System motors start running.
3
Processing Mail
49
| Page 49 | Jan-13-2017 10:45 |
To Next Page
Loading...
