2. To change the type of meter impression, if you are not in [Statement of Mailing]
mode.
Press to access the Build Impression screen and then select [Statement of
mailing] in the Type of impression screen and press [OK].
To select an option in the screen, use related keys located on right
hand side of display.
3. Enter the statement of mailing amount.
From the home screen:
Begin to type in the statement of mailing amount (keys 1 to 9 or dot).The Amount
entry screen is displayed.
Type the amount in and press [OK] to validate and return to the home screen.
From the Build Impression screen:
Select the Amount line.
- Type the amount in and press [OK] to validate.
- Press to return to the home screen.
You are now ready to print the statement of mailing.
60
| Page 60 | Jan-13-2017 10:45 |
3
Processing Mail
To Next Page
Loading...
