R&S ZNA67 - Increased if Bandwidth 30 Mhz; Frequency Resolution 1 Mhz; Continuous Data Recording

Concepts and features
R&S
®
ZNA
259User Manual 1178.6462.02 ─ 20
To enable n-port converter measurements on an n-port R&S ZNA, you can use the LO
Out connector at the rear panel of the R&S ZNA as common LO drive port.
4.7.8 Increased IF bandwidth 30 MHz
Option R&S ZNA-K17
This software option increases the maximum measurement bandwidth (IF bandwidth)
of a R&S ZNA from 1.5 MHz to 30 MHz.
4.7.9 Frequency resolution 1 mHz
Option R&S ZNA-K19
This software option improves the frequency resolution of a R&S ZNA to 1 mHz.
4.7.10 Continuous data recording
Option R&S ZNA-K28
Option R&S ZNA-K28 offers a "controlled timing" feature, which guarantees constant
measurement times per sweep point, as long as no settings are changed by the user.
Optional extensions and accessories