R&S ZNA67 - Entering Data

Getting Started
R&S
®
ZNA
66User Manual 1178.6462.02 ─ 20
Screen element Action Drag and drop...
Delete See Chapter 3.3.5.3, "Deleting display elements", on page 65
Trace Create See Chapter 3.3.5.1, "Adding new traces and diagrams", on page 62
Move vertically Reference line marker (right diagram edge)
Move into other or new
diagram
Trace line
Delete See Chapter 3.3.5.3, "Deleting display elements", on page 65
Reset / suspend
graphic zoom
"Zoom" element in additional trace line --> "Delete" icon; see Chapter 3.3.7.1,
"Using the graphical zoom", on page 70
Marker Create See Chapter 3.3.5.2, "Adding new markers", on page 64
Move horizontally Marker symbol
Delete Marker or marker info field --> "Delete" icon; see Chapter 3.3.5.3, "Deleting dis-
play elements", on page 65
Marker info field Add See Chapter 3.3.5.2, "Adding new markers", on page 64
Move within diagram Marker info field (move to one of several pre-defined positions)
Delete See Chapter 3.3.5.3, "Deleting display elements", on page 65
3.3.6 Entering data
The analyzer provides dialogs with various types of input fields where you can enter
numeric values and character data. Data entry with a mouse and an external keyboard
is a standard procedure known from other Windows
®
applications. However, there are
various other ways to enter data.
3.3.6.1 Dual-window mode vs. single-window mode
In dual-window mode (default), both the application window and the control window are
shown. Whenever you select an editable value, a suitable editor is displayed in the
data entry part of the control window.
Operating the instrument