GUI reference
R&S
®
ZNA
298User Manual 1178.6462.02 ─ 20
5 GUI reference
This chapter describes the Graphical User Interface (GUI) of the analyzer.
The most convenient way to access the GUI functions is via Softtools. Hence the GUI
reference is structured accordingly.
The softtools, in turn, can be opened in the following ways:
●
via the function keys in the control window
●
via the keys on the virtual Chapter 3.3.2.6, "Hardkey panel", on page 57
●
via the items in the main menu
For details, see Chapter 5.1, "Function keys and softtools", on page 298.
In case a GUI function can also be performed via remote control, one or more links at
the end of the function description point to the related remote control commands.
For a general overview of the analyzer's capabilities and their use, refer to Chapter 4,
"Concepts and features", on page 84.
5.1 Function keys and softtools
Most of the function keys in the control window serve as "openers" for an associated
softtool in the analyzer GUI.
By default, the following "opener logic" is applied:
●
If the associated softtool is not displayed, pressing the key
– opens the associated softtool
– activates its first enabled tab (default) or the last used tab (see "Use Default
Tab for Hardkey" on page 792)
– activates the first enabled input control on this tab (if any)
●
If the associated softtool is already displayed, pressing the hardkey
– activates the next enabled tab on the associated softtool (cyclically)
– activates the first enabled input control on this tab (if any)
Function keys and softtools
To Next Page
Loading...
