R&S ZNA67 - Power Tab

GUI reference
R&S
®
ZNA
476User Manual 1178.6462.02 ─ 20
The lists include external generator and power meter ports. The "Frequency" list is dis-
abled while the frequency conversion is switched off.
Remote command:
[SENSe<Ch>:]SWEep:AXIS:FREQuency
[SENSe<Ch>:]SWEep:AXIS:POWer
5.8.2 Power tab
The "Power" tab provides settings related to transmit and receive power. It is also dis-
played on the "Pwr Bw Avg" softtool.
5.8.2.1 Controls on the Power tab
For power sweeps, the Start Power / Stop Power can be set on the Stimulus tab of the
"Stimulus" softtool.
Some of the buttons on the "S-Params" tab open related dialogs.
●
"Power Config...": see Chapter 5.8.2.2, "Power Config dialog", on page 478
●
"ALC Config...": see Chapter 5.8.2.3, "ALC Config dialog", on page 478.
Stimulus softtool