R&S ZNA67 - All Mem All Data Tab

GUI reference
R&S
®
ZNA
394User Manual 1178.6462.02 ─ 20
The trace functions comprise the following mathematical operations:
●
Active trace math on unformatted and formatted traces, as configured in the Chap-
ter 5.5.4, "Math tab", on page 396.
●
A shift of the data trace (see "Shift Trace" on page 419).
Data to <Destination> stores the raw trace without the trace functions, "Data & Func to
<Destination>" stores the trace after it has been transformed using the trace functions.
For the relation between a data trace and its associated memory traces, see "Coupling
of data and memory traces" on page 392.
Remote command:
CALCulate<Chn>:MATH:MEMorize
TRACe:COPY:MATH
Destination
Selects the destination for the Data to <Destination> and Data & Func to <Destination>
operations.
The destination can be one of the following:
●
An existing memory trace of the active data trace.
The existing memory trace is overwritten.
●
"New Trace"
The data are copied to a new memory trace, associated to the current data trace.
Remote command:
n/a
Show <Active Data Trace>
Shows or hides the active data trace in the diagram.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
Show <Mem>
Shows or hides the active memory trace or the first memory trace of the active data
trace.
If no memory trace is associated with the active data trace, "Show <Mem>" is disabled.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
5.5.3 All Mem All Data tab
Performs actions on all data or memory traces in the active recall set.
Background information
Refer to "Trace types" on page 99.
Traces softtool