GUI reference
R&S
®
ZNA
397User Manual 1178.6462.02 ─ 20
5.5.4.1 Controls on the Math tab
The "Define Math..." buttons in the "Complex Data" and "Formatted Data" sections
both open the User Def Math dialog, but with different scope:
●
"Complex Data" > "Define Math..." defines mathematical operations on raw com-
plex trace data.
●
"Formatted Data" > "Define Math..." defines mathematical operations onformatted
trace data.
Both can be combined.
Complex Data/Formatted Data
The controls in the "Complex Data" section define math operations on raw complex
trace data, the controls in the "Formatted Data" section define math operations on for-
matted trace data.
"Complex Data" math is available in all firmware versions of all R&S ZNx vector net-
work analyzers. "Formatted Data" math was added in version 1.80 of the R&S ZNA
firmware.
Trace Math ← Complex Data/Formatted Data
Activates or deactivates the "Complex Data" and/or "Formatted Data" formula previ-
ously defined using Data / <Mem>, Data - <Mem>, or "Define Math..." (via Chap-
ter 5.5.4.2, "User Def Math dialog", on page 398).
Trace math for unformatted and formatted trace data can be active at the same time.
Traces softtool
To Next Page
Loading...
