R&S ZNA67 - Page 445

GUI reference
R&S
®
ZNA
445User Manual 1178.6462.02 ─ 20
Show Limit Circle
Shows or hides the limit line associated with the active trace in a polar diagram area.
The limit line colors are defined in the "Define User Color Scheme" dialog (see Chap-
ter 5.18.3.2, "Define User Color Scheme dialog", on page 778). You can choose
between various options:
●
Assign the same color to traces and associated limit lines.
●
Assign different colors to limit line segments with disabled limit check.
Note: Display of the limit line and limit check are independent of each other: Hiding the
limit line does not switch off the limit check.
Lines softtool