R&S ZNA67 - Page 451

GUI reference
R&S
®
ZNA
451User Manual 1178.6462.02 ─ 20
Mkr <i> Stimulus / Ref Mkr Stimulus
Gets/sets the stimulus value of the active marker.
Remote command:
CALCulate<Chn>:MARKer<Mk>:X
CALCulate<Chn>:MARKer<Mk>:REFerence:X
Mkr <i> Arb. Response / Ref Mkr Arb. Response
Gets/sets the response value (Y position) of an "Arbitrary" marker (see "Marker Mode"
on page 454).
Remote command:
CALCulate<Chn>:MARKer<Mk>:Y
CALCulate<Chn>:MARKer<Mk>:REFerence:Y
On
Enables/disables the active marker.
Markers remember their "Marker Props" while disabled (see Chapter 5.7.2, "Marker
Props tab", on page 453). The marker properties are definitely lost when the associ-
ated trace is deleted.
Remote command:
CALCulate<Chn>:MARKer<Mk>[:STATe]
CALCulate<Chn>:MARKer<Mk>:REFerence[:STATe]
All Off
Disables all markers of the active trace.
Marker softtool