Chapter 5: Standard Chart Operations 5-3
Removing a Chart
Card
Figure 5-1: Removing the Chart Card
Removing a Chart Card
Werecommendthatbeforeyouremove a chartcartridge,you ensurethechart
is not being used on any otherdisplay unit.Removing a chart cartridge whilst
a displayunit is accessing the chart may cause an operational error.
➤ To removea chart card:
1. Open the card cover, at the lower left of the display front panel.
2. Presson the card you wish to remove, and move the top of the card to the
leftto clearthe retaining pegs.
The card will spring half-wayout, enablingyou to grip the card and
removeit from the slot.
3. Remember to close the card cover so that it clicks shut, to prevent water
from entering the card reader assembly.
Displaying the Chart Data
Thenewchartinformationwillbedisplayedwhenyoumovethecursorintoan
areacovered by the new chart or, if it is already in the area, changethe range
scale.
Ifan
hsb
2
seriesrepeaterdisplayisconnected,thechartcanalsobeaccessedby
therepeater display. To see the chart you may need to zoom or pan, to redraw
the chart area to the screen.
D4158-1
81186_3.book Page 3 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
