5-26 hsb
2
PLUS Series LCD Display
Using the Route List
to Erase and Name a
Route
Figure 5-8: Route Information Window
4. Press ENTER to remove the Route Information window, then ENTER or
CLEAR to return to the route soft keys.
5. To returnto the defaultsoft key display, press ENTER.
Using the Route List to Erase and Name a Route
You can deletea route and you can re-name a route by selecting the route on
theroute list.
➤ To select a route to delete or re-name:
1. Press the ROUTE soft key, followedby MORE,thenpressROUTE LIST.The
routelist is displayed. The selectionbar indicates the selectedroute.
Pressthe appropriate soft key – ERASE ROUTE orNAME ROUTE.
2. If you ERASE a route you are prompted to confirm.
Press NO to cancel theoperation,then ENTER or CLEAR if you wish to
removethe route list.
PressYES toerasethe route fromthelist,then ENTER or CLEAR to remove
theroutelist.
PLANNED SOG
0.0kn
TIME
ETA TOTAL
ACTUAL
SOG
1.0kn
INFO FOR ROUTE-CURRENT ROUTE
WPT POSITION BRG DISTANCE TOTAL TIME
°T nm nm ETA
01 50°21^97N --- 0.0 0.0 --:--
001°15^80W
02 50°21^97N 090 4.4 4.4 --:--
001°08^75W
03 50°27^48N 000 5.5 10.0 --:--
001°08^75W
D4264-1
ROUTE
ERASE
ROUTE
81186_3.book Page 26 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
