Chapter 2: Getting Started & Adjusting the Display 2-7
Controlling the
Display
2.3 Controlling the Display
You controlthe display using the cursorand control keys.You startall
operations fromthe default screen, thatis the default soft keys are displayed:
Chart
Radar
When you have completed an actionusing the soft keys, press ENTER or
CLEAR to return to the default screen; you mayneed to press ENTER or
CLEAR several times to back-track through the soft key hierarchy.
Note: If you have set up your system so that the default soft keys are not dis-
played all the time, press any soft key to display the labels.
The remainderof this section describes how to select the mode of operation
and switch half-screenwindows on/off.The followingsections describe how
to set up the display for the Radar and for the Chart.
The controlsaresummarizedin the fold-outillustrationon pages 2-11
and 2-12 .
Selecting the Mode of Operation
You use the DISPLAY key to select the full-screenmode.
If the datais available on your system, the following modes (describedon
Operating Modes on page 1-6) can be selected:
•Radar
•Chart
•Datalog
The DISPLAY key also accesses the soft keys for the half-screen window
options.
Note: If your
hsb
2
display system includes a Fishfinder display, refer to the
Owner’s Handbook supplied with your Fishfinder for operating details.
GOTO SCREENROUTE FIND SHIP
D4160-1
TARGETS SCREENHDG MODE
D4152-3
MARPA
81186_3.book Page 7 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
