EasyManua.ls Logo

Raymarine hsb2 PLUS Series - Clearing the Current Route; Retrieve a Route from the Database

Raymarine hsb2 PLUS Series
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5: Standard Chart Operations 5-23
Clearing the Current
Route
You can use a Navigator Keypad (see Using the ST60 or ST80 Navigator
Keypad on page 5-15)to name the route.
5. Press ENTER to finish and clear the Name List, or press CLEAR to cancel
the operation. To return to the default soft key display, press ENTER again.
Clearing the Current Route
Youcanclearthecurrentroutefromthescreen.WhenyouselectCLEAR ROUTE
if the current route has not been saved, you have the option of saving it and, if
you are following the current route, you have the option to stop.
To clear the current route:
1. Press the ROUTE defaultsoft key or place the cursorover a route leg until
the text RTE is displayed.
Pressthe CLEAR ROUTE soft key.
2. If you are following the current route the STOP FOLLOW soft keys are dis-
played.
To cancel the CLEAR operationpressNO.
To stop following and clear the route press YES.
3. If the route has not been saved the SAVE ROUTE soft keys are displayed.
To clear theroute, withoutsaving it in the route database,press NO.
To save the route in the database, press YES. The Name route soft keys are
displayedand you shouldcontinue as described in the previous section,
Saving the Current Route on page 5-22.
The current routeis cleared from the screen and the defaultsoft keys are
displayed. You can now use the ROUTE soft keys to make a route, or to show
another route from the database.
Retrieve a Route From the Database
You can selecta route as the current route from the databaselist. The list is
accessed from the second set of ROUTE soft keys.
To select a route as the current route:
1. Press the ROUTE soft key, followedby MORE,thenpressROUTE LIST.The
route list is displayed as illustrated in Figure 5-7. The selectionbar indi-
catesthe selectedroute.
2. Use the trackpadto selectthe requiredroute then pressthe SHOW ROUTE
softkey.Thechartisre-drawnatascalesuitabletodisplaythewholeroute.
ROUTE
RTE
STOP
FOLLOW
SAVE
ROUTE
ROUTE
SHOW
ROUTE
81186_3.book Page 23 Thursday, August 22, 2002 8:23 AM

Table of Contents

Other manuals for Raymarine hsb2 PLUS Series

Related product manuals