Chapter 8: Installation 8-9
Mounting the Display
Unit
8.5 Mounting the Display Unit
The displayunit is waterproof to CFR46 and can be installed either above or
belowdeck. The displayunit can be mountedusing the mounting bracket
supplied,or console mounted using the optional flush-mounting kit (see
Section 8.2).
Mounting Bracket
Thedisplayunit canbe mountedon a dash, charttable,bulkheador deckhead.
Figure 8-4: LCD Display Mounting
1. Loosenthe knobs and remove the mountingbracket from the display unit.
2. Mark the locationsof the mounting bracket screw holes on the mounting
surface.
3. Usethescrews supplied to attach the mountingbracketatthe markedloca-
tions.
4. Attachthe displayunit to the mounting bracket, adjustthe display angle
and tighten the knobs.
Console Mounting
The displayunit can be consolemounted if required, using the optionalflush-
mounting kit (M92708).
81186_3.book Page 9 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
