5-32 hsb
2
PLUS Series LCD Display
Going To an
Individual Target
Point
Advancing to a Waypoint
➤ Once you arefollowinga route, youcan advanceto thenextwaypoint,evenif
you have not reached the currenttargetwaypoint:
1. If necessary, press theGOTO defaultsoft key to display the Goto/Follow
softkeys.
2. PresstheWAYPOINT ADVANCE softkey.Thecurrentlegoftherouteisaban-
donedandthenext waypointbecomes the target.The displayisupdatedto
show the new route leg.
Restart Cross Track Error (XTE)
While you are following a route, or going to a targetpoint, you can restart the
XTE. This sets the XTE to zero and moves the origin to the actual vessel
position.
Restarting XTE is useful if you find yourself off trackand want to go straight
to yourtarget,rather than get back onto the originaltrack.
➤ To restart XTE:
1. Press the GOTO default soft key, the Follow/Goto soft keys are displayed.
2. PresstheRESTART XTE softkey.Therouteoriginmovestothecurrentvessel
position,thus the XTE becomes zero.
Going To an Individual Target Point
Rather than following a route, you can go directly to a selected target point,
thiscan be an existingwaypoint (not in the currentroute),or the cursor
position.
➤ To navigate directly to an existing waypoint:
1. Usethe trackpadtopositionthecursorovertherequiredwaypointuntilthe
letters WPT and the waypoint soft keys are displayed.
Alternatively,youcan selectthewaypointfromthe waypointlistas described
in Section 5.3.
GOTO
D4172-1
RESTART
XTE
WAYPOINT
ADVANCE
GOTO
CURSOR
STOP
FOLLOW
WAYPOINT
ADVANCE
GOTO
RESTART
XTE
WPT
D4163-1
GOTO
WAYPOINT
EDIT
WAYPOINT
ERASE
WAYPOINT
MOVE
WAYPOINT
81186_3.book Page 32 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
